Blood Flow Restriction Training

Restriction to blood flow first emerged as a form of exercise training with Japanese bodybuilders in 1995, but is now more commonly referred to as Blood Flow Restriction (BFR) training.  Over the past 3-4 years, BFR training has exploded in popularity amongst strength & conditioning coaches and physiotherapists alike. Early research identified the capability of BFR to stimulate hypertrophy and strength gains when combined with low-load resistance training but there was a distinct lack of research on how this was happening.  

Nowadays, it’s suggested from clinical research that when BFR training is combined with low-load (20-40% 1 RM) strength training (approximately 75 reps over 3-4 sets), BFR can facilitate significant strength and morphological adaptations when compared to traditional methods (60-80% 1 RM).  However, practical research suggests that a combination of both low-load BFR (2-3 times/week) and high load training will result in the best adaptations and sport-specific outcomes over a 6-10 week period.

whats occuring

BFR training involves the use of non-invasive inflatable cuffs being applied to the upper thigh.  This allows partial restriction of arterial blood flow to the lower limb and full restriction of venous return to the target muscle group, as veins require less pressure to fully occlude than arteries.  This reduced arterial blood flow creates a hypoxic environment – a lack of oxygen.  

Whilst the cuff is inflated, this causes venous pooling of blood which results in metabolite rich blood.  The continuous BFR then traps this blood in the muscles during the exercise period, and thus, creates a high degree of metabolic stress.  Working the muscles into failure maximises this metabolic stress.  The muscle is undergoing less mechanical tension due to the reduced weight through the limb in comparison to resistance training.  This combination of increased metabolic stress and reduced mechanical tension are the primary factors for muscle hypertrophy in BFR training.

To date, the definitive mechanisms explaining adaptations to low-load BFR training have not been identified in a logical manner, however proposed mechanisms include: cell swelling, increased muscle fibre recruitment and increased corticomotor excitability.  Physiologically, this results in:

  • Increased Type-2 muscle fibre recruitment = greater potential for strength, speed and hypertrophy changes
  • Increased local growth hormone and IGF-1 levels by 200-300%
  • More rapid accumulation of metabolic by-products, such as lactate
  • Enhanced stimulation of muscle protein synthesis by 45-55%

WHO MIGHT BENEFIT FROM BFR?

 

The use of BFR training has vast potential for numerous athletes as BFR can facilitate hypertrophic and strength responses in skeletal muscle in the absence of high mechanical loads.  For example, an athlete is limited to low intensity strength training after hip/knee/ankle surgery, particularly when full range of motion is reduced through a joint. In the early stages post-surgery BFR training can still commence as exercises are undertaken at a lower intensity (sets/reps) and without the requirement for full range of motion.  

Certain athletes are unable to complete high load resistance training due to lower limb joint pain or restriction.  Research on patients who underwent Anterior Cruciate Ligament reconstruction reported less knee pain during the rehabilitation programme, when using light load BFR training versus traditional resistance training.  Only last month has research emerged that BFR training reduced pain sensitivity up to 24 hours after single-leg press exercises in patients with acute and chronic lower limb pain. However, further research is required on larger cohorts to explore this concept further.  

Likewise, research is ongoing to investigate the potential benefits of BFR enhancing the removal of metabolic waste products post-exercise.   When the cuff is released after strenuous exercise, the enhanced muscle oxygenation resulting from the ischemic stimulus promotes a faster return to normal muscle function as there is reduced swelling and muscle soreness.  Current proposals post exercise include inflating the cuff for 5 minutes, immediately deflating it for 3-5 minutes and this is repeated 4-5 times for 30-40 minutes in order to quickly restore maximal force production.

 

PRECAUTIONS

 

Consult your Strength and Conditioning Coach,  Physiotherapist or Athletic Therapist before commencing any BFR Training.  There is no robust evidence that BFR carries a safety-risk, however, the use of BFR training is not recommended if you suffer from any of the following:

  • Ischaemic heart disease, severe aortic stenosis and hypertrophic obstructive cardiomyopathy
  • Previous cerebral haemorrhage/stroke
  • A history of blood coagulation problems
  • Hypertension 

RECOMMENDED READING

  1. BINNIE, M.J. 2017. Blood flow restriction techniques for exercise performance: a review of current research and practical applications. J Aust Strength Cond, 25(3): 62-70.
  2. COOK et al. 2014. Improving strength and power in trained athletes with 3 weeks of occlusion training. International Journal of Sports Physiology and Performance, 9: 166-172. 
  3. COOK et al. 2018. Neuromuscular adaptations to low-load blood flow restricted resistance training. J Sports Sci Med, 17: 66-73.
  4. GILES et al. 2017.  Quadriceps strengthening with and without blood flow restriction in the treatment of patellofemoral pain: a double-blind randomised trial. Br J Sports Med, 51: 1688-1694. 
  5. HUGHES, L and PATTERSON, S.D. 2020. The effect of blood flow restriction exercise on exercise-induced hypoalgesia and endogenous opioid and endocannabinoid mechanisms of pain modulation. J Appl Phys, 
  6. HUGHES et al. 2018. Comparison of the acute perceptual and blood pressure response to heavy load and light load blood flow restriction resistance exercise in anterior cruciate ligament reconstruction patients and non-injured populations. J Phys Ther Sport, 33: 54-61. 
  7. HUGHES et al. 2018.  Influence and reliability of lower-limb arterial occlusion pressure at different body positions. Peer J, 6: 4697.
  8. HUGHES et al. 2017. Blood flow restriction training in clinical musculoskeletal rehabilitation: a systematic review and meta-analysis.Br J Sports Med, 51: 1003-1011.
  9. INGRAM et al. 2017. The influence of time on determining blood flow restriction pressure. J Sci Med Sport, 20: 777-780. 
  10. KORAKAKIS et al. 2018. Low load resistance training with blood flow restriction decreases anterior knee pain more than resistance training alone. A pilot randomised controlled trial. J Phys Ther Sport, 34: 121-128.

 

MARK GALLAGHER

MARK GALLAGHER

PHYSIOTHERAPIST

Mark is a Musculoskeletal Physiotherapist who has worked in conjunction with AXSOM Sports and Mayo GAA since 2013 and regularly implement’s BFR training with specific players & athlete’s. Whilst studying for an MSc in Physiotherapy at Robert Gordon University, Mark worked with the Aberdeen Football Club’s Academy. He previously completed a part-time MSc in Sports Medicine and Biomechanics at the University of Dundee and a BSc in Athletic Therapy and Training at Dublin City University. 

Field Sport Conditioning

Field Sport Conditioning

As teams across the country are forced to suspend all collective training, we thought we would help out with a sample session that can be completed individually and modified to suit!
This session includes work in all energy systems to maximise transfer to your sport.
Give it a go and pass it along to your team mates if you think they would benefit. Feel free to get in touch with any questions!

read more
Repetition Tempo

Repetition Tempo

Tempo is a training variable equal in importance to reps and sets. This programming tool allows coaches to target specific adaptations in an athletes programme and is a key component of a training plan. Essentially, in resistance training, tempo refers to the speed that an exercise is performed. The tempo that each rep is performed at will dictate the total time under tension (TUT) for any given set, and this component is one of the major keys to achieving the desired training response.

read more
Maximal Aerobic Speed

Maximal Aerobic Speed

In recent years Maximal Aerobic Speed has become popular among team sports in particular, primarily because it presents a simple and effective method of testing aerobic power. However, the real value of this method is that the data from testing can be used directly in the prescription of conditioning loads. This article aims to provide detailed instructions on how to effectively administer an MAS test, in a team setting, and examples of how to effectively use this data.

read more

Movement Skills – Acceleration

There are many elements to enhancing speed, no one training method holds the key. Rather it is a combination of components that result in greatest improvements. For example, developing specific strength qualities, is one of the most effective ways to increase the power necessary for maximal sprinting. However unless an athlete first focuses on movement, and in turn movement skills, they may struggle to maximise the results from their efforts in other areas.

Movement Prep

The purpose of any physical preparation routine should be to optimise performance in the upcoming session or competition, while decreasing the risk of injury.
Traditional warm-ups have typically included light aerobic movement followed by static stretching, and while this approach is successful in raising body temperature, it does not contribute significantly towards reducing injury risk, and certainly not towards optimising performance.

Pre-Season in Gaelic Games

We are at that time of year where a lot of teams are returning to training for the season ahead. Of course, most will have different league and championship calendars and will go about their preparation for each competition in various ways. Some will begin with gym sessions only, some will opt for field sessions only, and some will choose a combination of both. Some may even decide to give their players another few weeks before returning to any form of training.

Fuel Your Performance

At AXSOM, we believe that the process of eating should be viewed simply as fuelling the body. In the same way that a high performance car needs clean fuel to perform to the highest level, the body needs clean fuel to be at its most efficient and effective. We fuel to train, fuel to recover, and fuel to compete. This is applicable in all areas of life, not just with regards to competitive athletes. With nutrition, you are not only fueling the body, but the mind too, as food provides energy for our brain as well as our bodies.

Training Variables – Part 3

As is the case when determining the optimal reps and tempo, the training objective also dictates another important variable – the number of sets.
In general, the higher the number of repetitions, the less sets that are required to achieve the optimal volume. Conversely, the lower the number of repetitions being performed, the more sets that are needed. There are of course exceptions to this, but to illustrate how training objective will most typically influence the number of sets performed we will take two examples for comparison..

Training Variables – Part 2

As a general rule of thumb, the higher the total time under tension, the greater the impact on body composition. This is due to greater metabolic adaptations associated with increased time under tension. In order for an athlete to maintain control over a weight for a prolonged period, he/she must sacrifice on the intensity of the set (weight on the bar). This has a knock on effect of potentially reducing the strength training effect. Heavier weights will be required to optimally develop maximal strength, and particularly so to develop relative strength, therefore lower prescriptions for total time under tension must be applied.

SUBSCRIBE

JOIN THE AXSOM EMAIL LIST